PP Hollow Plastic Building Formwork Production Line
Hot Products: PP Hollow Building Formwork Production Line WPC Equipment Plastic Pipe Production Line Plastic Plate/Sheet Equipment Hollow Profile Board Production Line Marine Anti-skid Pedal Equipment Spiral Rubber Tube Protection Sheath Product
HOTLINE：+86-532-85213196
Product Details
Our company specialized in manufacturing PP hollow building board production line, and provides full production equipment for many enterprises at home and abroad.
PP board “number of layer” classification:
Single layer
3 layer co-extrusion
PP board “number of plate” classification:
One out one: Single width 915mm or 1220mm
One out two: Double widht 915mm*2
The main technical characteristics of PP hollow plastic building board:
1.PP hollow plastic building board has high strength, impact resistance, wear resistance, long service life, the turnover times can be more than 100 times.
2.PP hollow plastic building board can be processed, saw, planer, nail and used together with wood plastic board.
3.The two surface(smooth surface or pattern surface) of PP hollow plastic building board have different effect. If use smooth surface, the surface of the rammer body will be smooth and clean after the removal of the form-work and concrete pouring, meet the requirements of veneer and decorative water, no need second plastering, saving material and time, reduce the cost of cleaning and maintenance, the quality is stable and saves time after concrete forming. It’s especially suitable for the damp environment such as basement engineering, bridge piers of highway and railway; if use pattern surface, it’s helpful to combine with the plaster layer. In particular, the use of the pattern surface of bridge piers can met the requirements of decorative finish and decorative water, as the special diffuse light reflection of the pattern surface, it avoids the strong light reflection which affects the driver’s sight and plays a role of safety protection.
4.This new hollow plastic building board is light in weight, convenient to support and disassemble mould, low in labor intensity, high construction efficiency, safe and reliable, moisture absorption, corrosion-resistant, acid-alkali resistant, smooth and clean surface, no need to brush mould release agent.
5.The waste boards and edges of this new hollow plastic building board can be recycled, which can save costs and reduce pollution.
6.The comprehensive use cost of this new hollow plastic building board can save above 30% than traditional wood board.
Technical parameters:
| Model | HS-SJ120+90（Single out） | HS-SJ150（Double out） |
| Mould width | 915mm、1220mm | 915mm、1220mm |
| Mould thickness | 12-20mm | 12-20mm |
| Mould structure | Single layer, three layer | Single layer, three layer |
The hollow plastic building board takes the green, environmental protection and new type required by modern industrialization as the premise, and has the advantages of high efficiency, energy saving, waterproof, non-deformation, long life, recyclables and other details, reduce the construction cost effectively, and have the advantages that other board cannot replace. The product technology exceeds the technical standard of other board, the product is widely used not only for building board, but also for chemical solvent trough, decorative wall panels, furniture and similar appliance material, decoration auxiliary material and others.
The characteristic of hollow plastic building board:
1.The hollow plastic building board is easy to support and dis-assembly
This kind hollow plastic building board is easy to support and dis-assembly.It’s connect with the buckle, operate easy and quickly; the surface of board is smooth and clean, automatically demoulding, no cleaning maintenance, no demoulding agent, the surface of the board is non-stick cement after use, and no need to clean; the construction efficiency is 40% higher than steel board under the same workload; the construction efficiency can be increased by 40% compared with bamboo and wood board.
2.The installation time of the hollow plastic building board is short
Under the same conditions, horizontal board laying per 1000㎡ building area, in other words, based on same building area, the hollow energy saving building board can save time about 40% less than traditional board.
3.The time of disassemble hollow building board is short
The thermal expansion coefficient of the hollow energy saving building board is quite different from that of concrete, after pouring, the board will be separated automatically with the concrete solidifying with the change of temperature, and the concrete can be removed easily without tapping, and the operation time will be greatly saved.
4.The hollow building board is easy and safe to transfer
The density of this kind hollow building board is 0.4g/cm³, only 1/21 of steel, lightweight, a worker can pick up a 900mm*1800mm board by hand easily, it’s easy to carry. The board will not deform and absorb water in the process of using, it can improve the construction safety greatly, and its damage rate is less than 1‰.
The use and characteristic of hollow plastic building board:
1.It has strong properties of moisture resistance, corrosion resistance, acid and alkali resistance, rigid and plastic combination of board, high strength, light weight, high impact strength, it can saws, planers, nails, cold and high temperature resistance.
Product size: 1.2cm*91.5cm*183cm 1.2cm*122cm*244cm
Product size: 1.4cm*91.5cm*183cm 1.4cm*122cm*244cm
Product size: 1.6cm*91.5cm*183cm 1.6cm*122cm*244cm
Product size: 1.8cm*91.5cm*183cm 1.8cm*122cm*244cm
The length of the product can be any length.
High strength, strong toughness, impact resistance and elasticity, it’s not easy to be deformed,, then increase the turnover use times of the board greatly.
3.Light weight, complete specification, convenient form removal, safe and reliable construction and handing, low labor intensity and high construction efficiency.
4.It can be used together with wood(bamboo) plywood and other material board.
5.This board can be used for more than 50 times in normal use by testing, it can reduce the construction cost greatly, and the used old board can be recovered, trade in old for new, more substantial cost savings, it’s conducive to the development of the board leasing industry.
6.It’s no need to brush demoulding agent during the use process, easy to clean and maintain, so it reduce the cost for board cleaning and maintenance.
7.Smooth and clean surface, good peeling property and easy demoulding, it can speed up the construction process, and help to realize water concrete.
8.If the board is damaged, it can be 100% recycled, and reduce the waste pollution to the environment, it conforms to the basic national policy of the state to create a conservation-oriented society, and the board has the common usage of the conventional building board and more characteristics than the conventional board.
